Wood & Privacy Fence Installation Port Washington, WI 53074

Fence in Port Washington, WI (53074) · Local Professionals

Milwaukee Fence Company · Fast response in Port Washington and the Milwaukee area · Free estimate 24h

✅ AFA Member Installer (American Fence Association) 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm

+27Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Port Washington sits on a bluff above Lake Michigan, and the older homes that line these streets face real challenges from wind exposure, drainage, and property lines that often run tight to neighbors and the water's edge. Milwaukee Fence Company has been installing and repairing fences in Port Washington (53074) and the surrounding Milwaukee area since 2012, and we know what works on these properties.

Homeowners in Port Washington call us when they need a new fence that will stand up to lakefront weather, when a gate needs repair, when a fence post has rotted at the ground line, or when a storm has brought down a section of fence. We show up with our own crews, give you straight talk about repair versus replacement, and leave the job clean.

Fence Installation and Repair in Port Washington (53074)

Port Washington's housing stock is a mix of established single-family homes, many on modest lots with tight setbacks and older property lines. The bluff terrain and proximity to the lake mean wind load is real, drainage at the fence line matters, and post setting depth and concrete footings are not optional. We install fences to handle it. Our team works with wood and vinyl privacy fences, chain link, aluminum and ornamental iron, and gates of all kinds, including automatic driveway gates for properties where convenience and security matter.

Since 2012, we have installed and repaired hundreds of fences in Port Washington and the Milwaukee area. We are fully insured and AFA Member Installers through the American Fence Association. When we set a post, we use concrete footings and proper spacing. When we repair, we tell you whether the fence is worth fixing or if replacement makes better sense. We handle storm damage assessment and documentation, fence post replacement, gate repair, and pool fencing installed to meet local pool barrier codes.

Our services in Port Washington

Wood & Privacy Fence Installation in Port Washington · Milwaukee's narrow lots put most privacy fence work in that tight run between…
Vinyl & PVC Fence Installation in Port Washington · Vinyl holds up against the freeze-thaw cycle that cracks lesser materials on…
Chain Link Fence Installation in Port Washington · Chain link is the practical choice for Milwaukee's alley-facing side yards and…
Aluminum & Ornamental Iron Fencing in Port Washington · Milwaukee's historic bluff-side homes and near-west districts call for…
Fence Repair in Port Washington · Fence lines in Milwaukee take a beating from frost heave…
Storm Damage Fence Repair in Port Washington · Lake-effect ice storms and heavy snow load snap rails and pull posts loose in…
Fence Post Repair & Replacement in Port Washington · Milwaukee's heavy lake-plain clay holds water and swells with every freeze…
Gate Installation & Repair in Port Washington · Alley gates and garage-access gates take the hardest use on any Milwaukee fence…
Automatic & Driveway Gates in Port Washington · From flat driveways in the southern suburbs to the steep approaches in the lake…
Pool Fence Installation in Port Washington · Backyard pools across Milwaukee sit close to patios and detached garages…
Fence Replacement & Removal in Port Washington · When a wood fence has rotted or a chain link line has leaned for years…
Fence Staining & Restoration in Port Washington · Wisconsin summers bring sun and humidity swings hard on cedar and pine…
Commercial & Temporary Fencing in Port Washington · Job sites, events and vacant lots across the Milwaukee metro need fencing fast…
Farm & Ranch Fencing in Port Washington · Working ground in Washington, Dodge…

How a Fence Job Works in Port Washington

Step 1: Call us at (414) 255-7847 or contact us online. We schedule a free on-site assessment. We walk your property, measure the fence line, look at soil and drainage, check for utility lines, and talk through what you want. If you have an existing survey, bring it. We work from the line you identify and install on that line. We also check Port Washington city code and any HOA architectural standards that may apply to height, material, or color.

Step 2: We provide you a detailed estimate. If the fence is damaged, we explain whether repair is the right call or if replacement is the better spend. If it is storm damage, we document the damage and can help you prepare information for an insurance claim, though the decision to cover the work rests with your carrier. Once you approve, we schedule the work. Before we dig any post holes, we call 811 for a utility locate, as required by Wisconsin law. We then set posts in concrete, install rails and pickets or panels, and hang gates with proper hardware and hinges.

Step 3: We clean up all debris, walk through the finished fence with you, and make sure everything operates as it should. Gates close smoothly, latches work, and the fence line is square and plumb. You get a property that looks finished.

Fence pricing in Port Washington depends on what you are installing, how long the fence run is, and what the site requires. A wood privacy fence starts at $29 per linear foot. Vinyl runs from $40 per linear foot. Chain link starts at $17 per linear foot. Ornamental iron and aluminum fencing runs from $44 per linear foot. Fence repair begins at $495. A new gate installation starts at $520. If you need a post replaced or a major repair, expect $495 and up. Automatic driveway gates start at $3,100. Storm damage assessment is free. Call us at (414) 255-7847 for a free estimate on your specific project. We measure on-site, factor in setbacks and local code, and give you a real number.

✅ AFA Member Installer (American Fence Association), fully insured for work in Port Washington and nearby areas.

I own a home near the bluff in Port Washington. Do I need a permit for a new fence?

Port Washington has fence regulations, and some projects require a permit from the city building department. Height limits, setback rules, and corner-visibility requirements vary. If your property is in a master-planned community or has HOA covenants, those rules apply too and may be stricter. When we assess your property, we check what applies and guide you through the process. Always verify with the Port Washington building department or your HOA before work begins.

My fence came down in a storm. What do I do?

Call us right away at (414) 255-7847. We schedule a free damage assessment and document what happened. We photograph the damage and can help you gather information for an insurance claim if you have coverage. Whether the work is covered is up to your insurance carrier, but we can help you present the facts clearly. Storm damage repair often qualifies for faster scheduling.

What does a new fence cost in Port Washington?

Cost depends on the material, the length of fence, and the site conditions. Wood privacy fence runs about $29 per linear foot. Vinyl is around $40 per linear foot. Chain link is the most affordable at about $17 per linear foot. Ornamental iron and aluminum start at $44 per linear foot. A 100-foot run of wood fence, for example, might run $2,900 before any gates or site prep. Call us at (414) 255-7847 for a free on-site estimate with real numbers for your property.

My fence post is rotting at the ground line. Do I need to replace the whole fence?

Not necessarily. If the rest of the fence is sound, we can replace just the post. Rot at the ground line happens when moisture sits at the base of the post. We remove the old post, set a new one in concrete, and tie it back into the existing rails and pickets. Post replacement starts at $495. If multiple posts are failing or the fence is old and failing in other places, replacement of that section may make better financial sense. We assess on-site and tell you which option costs less over time.

I have an HOA in Port Washington. Will they approve my new fence?

Most HOAs in Port Washington have architectural standards for fence height, material, color, and style. You need to check your deed restrictions and HOA rules before you start. When we do the assessment, we ask about HOA approval and can help you understand what the rules allow. Some HOAs require written approval before work begins. Get that approval in writing before we start digging, and we will install exactly what you have approved.

Are you fully insured for fence work at my Port Washington home?

Yes. We are fully insured with general liability and workers' compensation coverage. Our crews are insured on every job. If you need proof of insurance before we start, we provide a certificate of insurance. You can work with confidence knowing the team on your property is covered.

I need a new driveway gate for my Port Washington property. What are my options?

We install manual gates, self-closing and self-latching gates, and automatic driveway gates with operators. A manual gate with proper hinges and hardware starts at $520. An automatic gate with a linear operator or cantilever system starts at $3,100, depending on the gate width, driveway slope, and whether you want a keypad, remote, or both. We can work with your existing driveway and power supply. Call us at (414) 255-7847 to discuss what fits your property and budget.